The edge banding of the metal decorative rope mesh

2022-04-26

The edge banding of the metal decorative rope mesh is also manual edge banding, so it requires the cooperation of two workers, during which it is necessary to take a small hammer for hitting, and the other worker needs to fix the mesh surface, so that the adjustment can be carried out. Enough for precise hits.

 

Workers should pay attention to safety from the start of the beating. Since these are iron objects, they may cause damage if they are not careful. So be extra careful. So how does this process work? When a few of us spread the net surface together and then level it, we will also need to stretch it in the process. Because the storage time will shorten the net surface, this is conducive to transportation, otherwise only the net surface will be transported, and the need A very large car will do, and it is precisely because the mesh surface can be stretched and shortened that we use it so widely.

When sealing the edge, displacement is also required, because the net buckle needs to be displaced per square meter to be able to carry out subsequent blows. This increases the difficulty of hitting. At this time, it is necessary to move and hit the channel. This requires two people to exert force at the same time before they can move. It can be seen that just sealing the edge is already very complicated.