How to choose the right stainless steel wire mesh

2021-09-23

How to choose stainless steel wire mesh. The weight of the stainless steel mesh: because the weight of the stainless steel mesh is simply measured and is related to the wire diameter and the mesh, we can judge by the weight. The formula for the weight of the stainless steel mesh: the weight of the stainless steel mesh = the square of the wire diameter * the number of meshes * the width * Length/2. Of course, this is only the theoretical weight of the stainless steel mesh.

Weaving method: Generally, plain weave of stainless steel mesh is the primary weaving method. Followed by twill, mat type and so on. The weaving method is mainly to reach the bottom of the mesh and thicken the mesh surface. In short, stainless steel testing methods generally need to be compared. But we can also achieve the purpose of quality inspection through some simple things or direct methods.

 

Generally, products need to check the raw materials in three directions of the initial section, middle section and end section. Here we may have a misunderstanding, thinking that what is not attracted by the magnet is good raw material, and what is magnetic is bad. This is actually incorrect. There is no direct connection between the magnetism of stainless steel mesh and the raw material.