How to avoid failures during the use of metal mesh belts?

2021-05-26

If the metal mesh belt is off-track, the tension screw at one end of the driven shaft should be adjusted and adjusted slowly. Do not adjust quickly and cause the edge of the mesh belt to be scratched. The metal conveyor mesh belt should be inspected and maintained regularly, and the vulnerable parts should be checked and maintained regularly. It is necessary to strengthen maintenance work. So how to avoid malfunctions during use?

1. If the chain drive stainless steel conveyor belt has skipped chains or unstable operation, check whether the sprocket chains on both sides of the conveyor belt gear shaft are the same, and then check whether the drive tooth end is excessively damaged.

 

2. If the metal mesh belt deviates from the direction, the tensioning screw at one end of the driven shaft should be adjusted and adjusted gradually. It is not necessary to adjust quickly and cause the edge of the conveyor belt to be scratched.

 

3. If the stainless steel conveyor belt has abnormal vibration conditions, immediately check whether the conveyor frame and the buffer roller in the construction of the transportation tunnel are rusty and refuse to rotate. Check and adjust one by one.

 

4. The maintenance staff should record and file every common fault, so as to make a very good reference for the next common fault.

 

5. The stainless steel mesh belt of metal material should be inspected and maintained regularly, and the maintenance work of spare parts should be improved.