2021-03-09
The metal mesh tensioning mesh elements are installed by using our proven installation technology and determined pre-tightening force. The distance between the connection points should not be too large (preferably not more than 350 to 400 mm) in order to achieve as uniform tension as possible.

In order to apply a corresponding pull to the edge of the metal decorative mesh, the first and last connection points should be within a range of about 50-100 mm from the edge. The exact location of the connection points must be coordinated according to the selection of the grid and the geometry.
Recommended Read
Decorative ceilings – a new choice to enhance the beauty and function of the space
Architectural Wire Mesh: Transform Spaces with Modern Metal Aesthetics