How to do the oxidation treatment of metal mesh curtain

How to do a good antioxidant treatment

Oxidation of metal mesh curtains is not a good thing. The oxidized aluminum plate will become ugly, which is also a loss for users. Alumina boards are almost useless.

Metal mesh curtains In packaging, it is important to control temperature and humidity. Therefore, the humidity of the wooden shaft and the box board should not exceed 18%, and the temperature of the aluminum roller should not exceed 45 ° C.

If the metal mesh curtain is transported from low temperature area to high temperature and high humidity area, do not immediately open the sealed packaging. In order to allow time for Wuxi aluminum plates to adapt to these environments, aluminum rollers should not be placed on the roof of workshops and warehouses where rain and snow are leaking. Air drying management should be strengthened to ensure that there is no water in the compressed air. In addition, the management of rolling oil is strengthened, and its water content is controlled below 0.04%.

Aluminum foil packaging should be sealed and the amount of desiccant should be placed in each roll. Reduce the contact between the surface of the aluminum plate and air and water, and take these measures to prevent the oxidation of the aluminum plate, which plays an important role in protecting the aluminum plate.

One of the key points of metal mesh curtains is that the aluminum plate punching plate is made of CNC punched aluminum plate. Due to the special material of the aluminum plate, scratches sometimes occur during the stamping process, affecting the appearance and use. To avoid this, a thin plastic film can be applied to the aluminum plate.