The metal mesh tensioning mesh elements are installed by using our proven installation technology and determined pre-tightening force. The distance between the connection points should not be too large (preferably not more than 350 to 400 mm) in order to achieve as uniform tension as possible.
In order to apply a corresponding pull to the edge of the metal decorative mesh, the first and last connection points should be within a range of about 50-100 mm from the edge. The exact location of the connection points must be coordinated according to the selection of the grid and the geometry.
: meshproduct@qunkun.net
Recommended
Talk specificall
Types and uses Metal decorative nets intrMay 14, 2021
Introduction of
Curtain wall decoration mesh production pMay 14, 2021
How to design or
Art planning is generally integrated intoMay 14, 2021
Briefly introduc
Decorative metal mesh is made of metal roMay 14, 2021