What to pay attention to when installing wire rope net

        What to pay attention to when installing wire rope net

　　 It is recommended to use the cable buckle connection method for the new steel wire rope to connect the new rope to the old rope. This is a common method for installing the steel rope. The type of cable buckle depends on the type of steel rope and the structure of the Yueyang steel wire mesh manufacturer.

Sometimes we will install a rotating shaft between the new and old wire ropes. The old wire ropes may produce torque during use, so we must ensure that this torque cannot be transferred to the new rope. When using the cable buckle, in order to prevent the rope from accidentally slipping off The end of the buckle must be tightly attached to the rope.

　　 Before installing the wire rope net, the structure, diameter, strength level, twist direction and other parameters of the wire rope should be checked again, and the installation can only be carried out after meeting the requirements. Measure the diameter of the wire rope before installation. Before starting, make sure that the new rope to be installed is suitable for the crane.